25.5x25.5mm DarwinFPV F411 Flight Controller with 5V BEC 45A 3-6S ESC ELRS 2.4G Receiver AIO Compatible with CineApe35 FPV Racing Drone
Idaniloju sisan

Ẹbun Ọfẹ
Kaabọ si Roymall, oju opo wẹ ẹbun rẹ. A dupẹ lọwọ rẹ, a si pese ẹbun ọfẹ pẹlu eyikeyi rira. Ṣetan lati ṣawari akojo wa? Yẹra ni koko wa, fi aṣẹ rẹ sii, ki o si gba ẹbun ọfẹ rẹ.Ilana Gbigbe
A nṣe awọn aṣẹ laarin ọjọ 2.Gbigbe deede jẹ ọjọ 5-7.Akoko gbigbe le yatọ da lori ibudo.1. Ilana Pada
A gba nikan awọn nkan ti a ra lati roymall.com. Awọn ẹbun ọfẹ ko le pada. Nkan gbọdọ jẹ ailohunsi ati ni apoti atilẹba.A nṣe awọn pada laarin ọjọ 3-5 lẹhin gbigba.Awọn nkan aṣa ko le pada.Kan si wa: service@roymall.com tabi Whatsapp: +86193598494712.Ilana Isanwo
Iwọ yoo gba isanwo lẹhin gbigba nkan. A ko san owo gbigbe pada.Kan si wa: service@roymall.com tabi Whatsapp: +8619359849471This 25.5x25.5mm DarwinFPV F411 45A ELRS AIO includes flight controller, ESC and receiver.
mso-bidi-font-family:"Times New Roman";font-size:11.0000pt;mso-font-kerning:1.0000pt;">
Description:
This is a unique AIO that meets the needs of today"s industry. It has a 25.5x25.5 mounting hole pitch, but it does not rotate 45u00b0! The advantage of this is a more compact and safer installation layout. Unlike traditional AIO, the electronic components on both sides are exposed outside the frame. It is more like a stack, but only one layer. You can install DJI O3, VISTA, HDZERO, Avatar and other digital VTX on it, which is very convenient.
All interfaces are of direct plug-in design, and installation can be completed without soldering any wires, making it suitable for novice players who cannot solder. The USB interface is also designed to face upward, which solves the industry problem of difficulty in adjusting whoop frame parameters.
The ESC and FC are designed separately to separate high-power and small-signal components to reduce interference and reduce the failure rate. Even if they are damaged, there is no need to replace them all together, which reduces maintenance costs. In addition, it also integrates an ELRS 2.4G receiver, which is especially suitable for users who are sensitive to cost and space.
Of course, we have also carried out the same glue protection treatment on the circuit board as always. Through feedback from tens of thousands of users in the past, this protection measure can indeed significantly reduce the risk of accidental damage due to impact, rain, etc.
Feature:
1. 25.5u00d725.5 mounting hole position, the entire AIO can be placed in the frame, and the protection is better;
2. It is more convenient to install DJI O3, VISTA, HDZERO, Avatar and other digital VTX;
3. Integrated ELRS 2.4G receiver, suitable for players who are more sensitive to cost and compactness;
4. ESC and FC isolation design reduces failure rate. Even if it is damaged, there is no need to replace everything together, reducing maintenance costs;
5. All interfaces are plug-in designs, suitable for novice players who cannot weld;
6. The USB interface has a straight-out design at the top, making it easier to adjust parameters of the whoop frame;
7. Glue-filled protective treatment greatly reduces the risk of accidental damage due to impact, rain, etc.
Specification:
Brand: DarwinFPV
Model: F411 45A ELRS AIO
Name: | Specification: |
F411 45A ELRS AlO | Input Voltage: 3-6S Lipo |
Mounting Dimensions: 25.5u00d725.5mm | |
Dimensions: 58.5u00d738u00d713mm | |
Weight: 16.4g | |
Package Dimensions: 79u00d755u00d730mm | |
Package Weight: 49.5u00b12g | |
DarwinFPV F411 45A ELRS AlO - FC Board | Main Control Chip: STM32F411 |
Gyro: MPU6500 | |
OSD: AT7456E | |
Receiver: SPI ELRS 2.4G | |
Input Voltage: 3-6S Lipo | |
BEC: 5V/0.5A u00d7 3 (Built-in overcurrent protection function) | |
USB Interface: 1x USB Type-C | |
Serial Port: UART1, UART2 | |
Soft Serial Port: S5 | |
Firmware : DARWINF4SX1280HD (BetaFlight) | |
Dimensions: 38u00d723u00d78.5mm | |
Weight : 3.9g | |
DarwinFPV F411 45A ELRS AlO - ESC Board | Main Control Chip: EFM8BB21 (8 bit 48MHz) |
Input Voltage: 3-6S Lipo | |
Continuous Current: 4x45A | |
Peak Current: 4u00d755A (5S) | |
Support Throttle Protocol: Dshot 300/600 | |
Galvanometer: Support (Current Meter Scale=125) | |
Firmware: J_H_40 (BlueJay) | |
Power Cable: #16AWG/120mm | |
Mounting Dimensions: 25.5u00d725.5mm | |
Dimensions: 38u00d738/x4mm | |
Weight: 6.6g |
Package Included:
1 x DarwinFPV F411 45A ELRS AIO
1 x 120mm power wireuff08#16AWG red/blackuff09
1 x Analog camera wireuff083Puff09
1 x Analog VTX wireuff084Puff09
1 x GPS wireuff084Puff09
1 x HD VTX wireuff084Puff09
2 x SH1.0 plastic shelluff083Puff09
3 x SH1.0 plastic shelluff084Puff09
1 x Spare screws
5 x M2*6.6 Shock absorbing ball(yellow)
1 xType-C dust plug
1 x Stickers
mso-bidi-font-family:"Times New Roman";font-size:11.0000pt;mso-font-kerning:1.0000pt;">
mso-bidi-font-family:"Times New Roman";font-size:11.0000pt;mso-font-kerning:1.0000pt;">
0 Liked Fi kun si ọkọ
- GOOSKY P25 2S-3S 2A/25W Lipo Balanced Charger GT050042
- 151
- $17.99/ $26.830