EQKIT® DIY Light Operated Switch Kit Light Control Switch Module Board With Photosensitive DC 5-6V
126
Direct purchase from the factory 
Idaniloju sisan
Ẹbun ọfẹ
Ilana gbigbe
Ilana padaẸbun Ọfẹ
Kaabọ si Roymall, oju opo wẹ ẹbun rẹ. A dupẹ lọwọ rẹ, a si pese ẹbun ọfẹ pẹlu eyikeyi rira. Ṣetan lati ṣawari akojo wa? Yẹra ni koko wa, fi aṣẹ rẹ sii, ki o si gba ẹbun ọfẹ rẹ.Ilana Gbigbe
A nṣe awọn aṣẹ laarin ọjọ 2.Gbigbe deede jẹ ọjọ 5-7.Akoko gbigbe le yatọ da lori ibudo.1. Ilana Pada
A gba nikan awọn nkan ti a ra lati roymall.com. Awọn ẹbun ọfẹ ko le pada. Nkan gbọdọ jẹ ailohunsi ati ni apoti atilẹba.A nṣe awọn pada laarin ọjọ 3-5 lẹhin gbigba.Awọn nkan aṣa ko le pada.Kan si wa: service@roymall.com tabi Whatsapp: +86193598494712.Ilana Isanwo
Iwọ yoo gba isanwo lẹhin gbigba nkan. A ko san owo gbigbe pada.Kan si wa: service@roymall.com tabi Whatsapp: +8619359849471
Description:
n
nOPS-1 light control switch has two trigger modes and two output modes:
n1). Set trigger mode by JMP1:
nLight trigger mode (1-3): When the photosensitive resistance induction to the outside light from the matt to light or light gradually increased, the relay pull.
nDark trigger mode (2-4): When the photosensitive resistance induction to the outside light from the light to the matt or light gradually weakened, the relay pull.
n2). Set output mode by JMP2:
nRelay passive output and triode-driven active output, JMP2 jumper cap set whether to let the relay work, if not use the relay passive output function, you can set the relay is not working to reduce circuit power consumption, jumper cap in 2-3 position allows the relay to work, jumper cap in 1-2 position to prohibit the relay work.
n1-2: Relay is not allowed to work
n2-3: Relay is allowed to work
n
nFeature:
n
nModel: OPS-1
nName: Light-Operated Switch DIY Kit
nFinished product size: 45*38mm
nWork voltage: 5-6V
nQuiescent current: 1.5mA
nPassive load Maximum power: 300W
nActive load Maximum current: 400mA
n
nNote:
n
nIt is assumed that users have soldering skills and troubleshooting skills to assemble this kit. Buyers are advised that due to skills of user is involved in assembly, it is not guaranteed every kit will end up being a working device. But we will make as much efforts as we can to approach that goal.
n
nInstallation: Click to open
n
nPackage includes:
n
n1 x DIY Light Operated Switch Kit
n
n
n
n
nOPS-1 light control switch has two trigger modes and two output modes:
n1). Set trigger mode by JMP1:
nLight trigger mode (1-3): When the photosensitive resistance induction to the outside light from the matt to light or light gradually increased, the relay pull.
nDark trigger mode (2-4): When the photosensitive resistance induction to the outside light from the light to the matt or light gradually weakened, the relay pull.
n2). Set output mode by JMP2:
nRelay passive output and triode-driven active output, JMP2 jumper cap set whether to let the relay work, if not use the relay passive output function, you can set the relay is not working to reduce circuit power consumption, jumper cap in 2-3 position allows the relay to work, jumper cap in 1-2 position to prohibit the relay work.
n1-2: Relay is not allowed to work
n2-3: Relay is allowed to work
n
nFeature:
n
nModel: OPS-1
nName: Light-Operated Switch DIY Kit
nFinished product size: 45*38mm
nWork voltage: 5-6V
nQuiescent current: 1.5mA
nPassive load Maximum power: 300W
nActive load Maximum current: 400mA
n
nNote:
n
nIt is assumed that users have soldering skills and troubleshooting skills to assemble this kit. Buyers are advised that due to skills of user is involved in assembly, it is not guaranteed every kit will end up being a working device. But we will make as much efforts as we can to approach that goal.
n
nInstallation: Click to open
n
nPackage includes:
n
n1 x DIY Light Operated Switch Kit
n
n
n
Electronics Ranking
n
n
n
n
n
n
n
n
