Eachine ET1 STEM Upgrade Hit & Miss Gas Engine Stirling High Performance Engine Model Combustion Engine Collection Metal Toy
247
Direct purchase from the factory 
Idaniloju sisan
Ẹbun ọfẹ
Ilana gbigbe
Ilana padaẸbun Ọfẹ
Kaabọ si Roymall, oju opo wẹ ẹbun rẹ. A dupẹ lọwọ rẹ, a si pese ẹbun ọfẹ pẹlu eyikeyi rira. Ṣetan lati ṣawari akojo wa? Yẹra ni koko wa, fi aṣẹ rẹ sii, ki o si gba ẹbun ọfẹ rẹ.Ilana Gbigbe
A nṣe awọn aṣẹ laarin ọjọ 2.Gbigbe deede jẹ ọjọ 5-7.Akoko gbigbe le yatọ da lori ibudo.1. Ilana Pada
A gba nikan awọn nkan ti a ra lati roymall.com. Awọn ẹbun ọfẹ ko le pada. Nkan gbọdọ jẹ ailohunsi ati ni apoti atilẹba.A nṣe awọn pada laarin ọjọ 3-5 lẹhin gbigba.Awọn nkan aṣa ko le pada.Kan si wa: service@roymall.com tabi Whatsapp: +86193598494712.Ilana Isanwo
Iwọ yoo gba isanwo lẹhin gbigba nkan. A ko san owo gbigbe pada.Kan si wa: service@roymall.com tabi Whatsapp: +8619359849471
Description:Brand: Eachine Item No.:Eachine ET1Item Name: Full Metal Hit & Miss Gas EngineColor: SliverMaterial: Aluminium AlloyWeight: About 2.2kg(Engine+Wooden Base)Size Of Engine: 180*125*75mm(L*W*H)Size Of Wooden Base: 180*66*50mm(L*W*H)Cylinder Diameter: 22mmLtinerary: 20mmVoltage: 3.5VFuel: ZIPPOOil or GasolineThe best tappet clearance: 0.5mmWeight: 1610gRevolutions Per minute:1200rmp
Spare Parts:For Rubber Ring
Engine Startup Steps:1. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries.2.Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there"s no air in the oil pipe.3.On the right side of the engine(installation of the flying hammer position), slowly turn conterclockwise by hand to buy more than one turn.Its role can make the mixed gasoline fully enter the cylinder.4.Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position)
Precautions:1.If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it"s very likely that the carburetor needle should be adjusted.2.Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio.
Note:1.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Spare Parts:For Rubber Ring
Engine Startup Steps:1. Open the bottom of base to check the wiring of the engine, connect the fuel tank piep, and install 3 AA batteries.2.Fill the fuel tank with gasoline(95#). When the filling is completed, make sure there"s no air in the oil pipe.3.On the right side of the engine(installation of the flying hammer position), slowly turn conterclockwise by hand to buy more than one turn.Its role can make the mixed gasoline fully enter the cylinder.4.Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine(installing the flying hammer position)
Precautions:1.If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it"s very likely that the carburetor needle should be adjusted.2.Screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel. This can be done several times to make the mixing ratio od gasonline and air re ach the normal working mix ratio.
Note:1.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
2.Please allow little differs due to manual measurement.3.Kids should be accompanied by adult. 4.Kids under 8 are not recommended to play.5.Please be carful when you add the fuel.6.An O-ring, which is not so airtight and can be started better
Package Included:1 X Eachine Hit & Miss Gas Engine (With Base)
