>>>MANUAL: Click here to open<<<

>>>Firmware: Click here to open<<<

SA5 Product Features:nnScreen Size: 4 inches IPS LCD, featuring a large knob for easy operation.nSpectrum Analyzer: Normal modeuff1a0.1-800MHz, Ultra modeuff1aprovides level calibration up to 5.3GHz, and can observe signals up to 12GHz. nSignal Generator: Outputs sine waves between 0.1-800MHz, square waves up to 4.4GHz, or RF test signals up to 5.3GHz when not used as a spectrum analyzer.nSwitchable resolution bandpass filters: from 200Hz to 850kHz.nOptional LNA: Built-in 20dB Low Noise Amplifier (LNA).nSpectrum Display: Display up to 450 points, Display four independently configured tracenStorage: MicroSD card slot for storing measurements, settings, and screen captures(SD card Not includes).

Input Attenuator: Step attenuator adjustable from 0dB to 31dB (not usable with LNA).nCalibration: Includes a built-in calibration signal generator for automatic self-test and input calibration.nPC Connectivity: Connects via USB to function as a PC-controlled spectrum analyzer or signal generator.nBattery: 5000mA, Rechargeable battery providing at least 10 hours of portable use.nMax Input Level: +10dBm. Ensure not to exceed this to avoid damage.

Specifications:

n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n

Specification	Details
Input Frequency Range	100kHz to 800MHz in normal mode; up to 6GHz with ULTRA mode enabled
Input Impedance	50 ohm when input attenuation set to 10dB or more
Input Attenuation	Selectable manual and automatic input attenuation between 0dB and 31dB in 1 dB steps when LNA not active
Maximum DC Input	u00b15V DC
Absolute Maximum Input Level	+6dBm with 0dB internal attenuation
Absolute Maximum Short-Term Peak Input Power	+20dBm with 30dB internal attenuation
Suggested Maximum Input Power	+0dBm with internal attenuation in automatic mode
Best Measurement Input Power	Below -25dBm
Input Intercept Point (IIP3)	+15dBm with 0dB internal attenuation
1dB Compression Point	-1dBm with 0dB internal attenuation
Power Detector Resolution	0.5dB
Linearity vs Frequency	u00b12dB below 5.3GHz, u00b15dB between 5.3GHz and 6GHz
Absolute Power Level Accuracy	u00b12dB after power level calibration
Built-in Optional LNA	20dB LNA with Noise Figure of 5dB
Lowest Discernible Signal without LNA	-102dBm at 30MHz using a resolution bandwidth of 30kHz
Lowest Discernible Signal with LNA	-145dBm at 30MHz using a resolution bandwidth of 200Hz
Frequency Accuracy	Equal to the selected resolution bandwidth
Phase Noise	-108dB/Hz at 100kHz offsetand -115dB/Hz at 1MHz offset@ 30MHz
Spur-Free Dynamic Range	70dB when using a 30kHz resolution bandwidth
Resolution Filters	0.2, 1, 3, 10, 30, 100, 300, 600, and 850 kHz
On-Screen Resolution	51, 101, 145, 290, or 450 measurement points
Scanning Speed	Over 1000 points/second using largest resolution filters
Automatic Optimization of Scanning Points	Ensures coverage of the whole scan range regardless of the chosen resolution bandwidth
Spur Suppression Option	For assessing if certain signals are internally generated or actually present in the input signal
Headphone Output	For listening to the demodulated audio (AM only). Stereo connector only, high impedance is louder, short protected

Package includes:

1 x 100k-5.3GHz Signal Generator