Simulation Sound Unit Set for 1/18 1/24 1/28 Flat On-Road Rock Crawler Climbing Truck RC Cars Vehicles Models Spare Parts Accessories
Idaniloju sisan

Ẹbun Ọfẹ
Kaabọ si Roymall, oju opo wẹ ẹbun rẹ. A dupẹ lọwọ rẹ, a si pese ẹbun ọfẹ pẹlu eyikeyi rira. Ṣetan lati ṣawari akojo wa? Yẹra ni koko wa, fi aṣẹ rẹ sii, ki o si gba ẹbun ọfẹ rẹ.Ilana Gbigbe
A nṣe awọn aṣẹ laarin ọjọ 2.Gbigbe deede jẹ ọjọ 5-7.Akoko gbigbe le yatọ da lori ibudo.1. Ilana Pada
A gba nikan awọn nkan ti a ra lati roymall.com. Awọn ẹbun ọfẹ ko le pada. Nkan gbọdọ jẹ ailohunsi ati ni apoti atilẹba.A nṣe awọn pada laarin ọjọ 3-5 lẹhin gbigba.Awọn nkan aṣa ko le pada.Kan si wa: service@roymall.com tabi Whatsapp: +86193598494712.Ilana Isanwo
Iwọ yoo gba isanwo lẹhin gbigba nkan. A ko san owo gbigbe pada.Kan si wa: service@roymall.com tabi Whatsapp: +8619359849471Description:
Item No.:SC0001/SC0002
Item Name:Sound Group
Material:Plastic Shell
Product Weight:15g
Suitable Models:1/28 1/24 1/18 Flat Car Climbing Car Universal
Packaging Size:8*12*1cm
Style:Diesel Version/Gasoline Version
Output Power:1W8 ohm 5V / 0.6 W8 ohm 3V
Signal Input:Positive Pulse 0.8 ms to 2.0 ms
Sound Quality:22.05 kHz Sampling Frequency
Memory:4M, 22.05 kHz Audio is About 20 Seconds
Note:
The power supply voltage of the sound group is up to 5V, and it must not exceed 5V. If it exceeds 5V, the built-in amplifier and microcontroller will be burned. If the BEC of the electric adjustment is 6V, it is recommended to connect 2 2A in series The rectifier diode removes power from the receiver, and the voltage drop is 1.2-1.4V, which supplies power to the sound group.
Control method:
After the control is turned on, when the throttle channel moves for the first time, the engine sound will automatically start. If the engine idles for more than 20 seconds, the engine sound will automatically turn off. After the throttle stick moves, the engine sound will start.
Neutral point setting:
Connect the speaker, ESC, and receiver (the receiver and control should be aligned with the frequency in advance), turn on the power of the remote control, power on the receiver, and then short-circuit (short-circuit) with tweezers or other conductive materials as shown in the figure. At this time, a beep will be emitted, indicating that the midpoint has been recorded, and then the throttle is pushed to the start/idle point. suspend for a while, and there will be another beep, indicating that the start/idle point has been recorded, and then push the throttle to the maximum, and there will be three beeps, and the whole setting is completed.
Package included:
1x Diesel Version/Gasoline Version Sound Group
0 Liked Fi kun si ọkọ
- GOOSKY P25 2S-3S 2A/25W Lipo Balanced Charger GT050042
- 325
- $17.99/ $26.830