UNO R3 USB Development Board With 2.8 Inch TFT Touch Display Module
140
Direct purchase from the factory 
Idaniloju sisan
Ẹbun ọfẹ
Ilana gbigbe
Ilana padaẸbun Ọfẹ
Kaabọ si Roymall, oju opo wẹ ẹbun rẹ. A dupẹ lọwọ rẹ, a si pese ẹbun ọfẹ pẹlu eyikeyi rira. Ṣetan lati ṣawari akojo wa? Yẹra ni koko wa, fi aṣẹ rẹ sii, ki o si gba ẹbun ọfẹ rẹ.Ilana Gbigbe
A nṣe awọn aṣẹ laarin ọjọ 2.Gbigbe deede jẹ ọjọ 5-7.Akoko gbigbe le yatọ da lori ibudo.1. Ilana Pada
A gba nikan awọn nkan ti a ra lati roymall.com. Awọn ẹbun ọfẹ ko le pada. Nkan gbọdọ jẹ ailohunsi ati ni apoti atilẹba.A nṣe awọn pada laarin ọjọ 3-5 lẹhin gbigba.Awọn nkan aṣa ko le pada.Kan si wa: service@roymall.com tabi Whatsapp: +86193598494712.Ilana Isanwo
Iwọ yoo gba isanwo lẹhin gbigba nkan. A ko san owo gbigbe pada.Kan si wa: service@roymall.com tabi Whatsapp: +8619359849471
UNO R3 ATmega328P Board:
nDescription:
n
nUNO R3 board is 100% compatible with original , now it has perfect quality and performance .
nis an open-source physical computing platform based on a simple i/o board and a development environment that implements theProcessing/Wiring language. can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
nThis is the new Tosduino Uno R3. In addition to all the features of the previous board, the Uno R3 now uses an ATmega16U2 instead of the ATmega8U2 chip. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
n
nNote:
n
nThe TOSduino Uno R3 requires the 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have 1.0 installed on that machine.
nThe small chip is ATmega16U2, the 28 pin DIP socket chip is ATmega328-pu.
n
n
n2.8 Inch LCD Display Feature:
nDescription:
n
n2.8 inch LCD TFT display
nBright, 4 white-LED backlight
nColorful, 18-bit 262,000 different shades
n4-wire resistive touchscreen 240 x 320 pixels with individual pixel control
nNo wiring, no soldering.
nSimply plug it in and load library
nOn-board 3.3V 300mA LDO regulator
n5V compatible, use with 3.3V or 5V logic
nSupport 2GB micro SD TF card
nSize: 7.8 x 5.3cm
n
nPackage included:
n
n1 x 2.8 Inch TFT LCD Shield Touch Display Module
n1 x UNO R3 ATmega328P Board with USB cable
n
n
n
n
n
n
n
n
n
n
nDescription:
n
nUNO R3 board is 100% compatible with original , now it has perfect quality and performance .
nis an open-source physical computing platform based on a simple i/o board and a development environment that implements theProcessing/Wiring language. can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
nThis is the new Tosduino Uno R3. In addition to all the features of the previous board, the Uno R3 now uses an ATmega16U2 instead of the ATmega8U2 chip. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
n
nNote:
n
nThe TOSduino Uno R3 requires the 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have 1.0 installed on that machine.
nThe small chip is ATmega16U2, the 28 pin DIP socket chip is ATmega328-pu.
n
n
n2.8 Inch LCD Display Feature:
nDescription:
n
n2.8 inch LCD TFT display
nBright, 4 white-LED backlight
nColorful, 18-bit 262,000 different shades
n4-wire resistive touchscreen 240 x 320 pixels with individual pixel control
nNo wiring, no soldering.
nSimply plug it in and load library
nOn-board 3.3V 300mA LDO regulator
n5V compatible, use with 3.3V or 5V logic
nSupport 2GB micro SD TF card
nSize: 7.8 x 5.3cm
n
nPackage included:
n
n1 x 2.8 Inch TFT LCD Shield Touch Display Module
n1 x UNO R3 ATmega328P Board with USB cable
n
n
n
n
n
n
n
n
n
n
Electronics Ranking
,,,
