1.6-50MHz PWR SWR Meter POWER SWR METER 0.5-150W Digital Power Standing Wave Meter Built-in Battery OLED Display
Direct purchase from the factory 
Idaniloju sisan
Ẹbun ọfẹ
Ilana gbigbe
Ilana padaẸbun Ọfẹ
Kaabọ si Roymall, oju opo wẹ ẹbun rẹ. A dupẹ lọwọ rẹ, a si pese ẹbun ọfẹ pẹlu eyikeyi rira. Ṣetan lati ṣawari akojo wa? Yẹra ni koko wa, fi aṣẹ rẹ sii, ki o si gba ẹbun ọfẹ rẹ.Ilana Gbigbe
A nṣe awọn aṣẹ laarin ọjọ 2.Gbigbe deede jẹ ọjọ 5-7.Akoko gbigbe le yatọ da lori ibudo.1. Ilana Pada
A gba nikan awọn nkan ti a ra lati roymall.com. Awọn ẹbun ọfẹ ko le pada. Nkan gbọdọ jẹ ailohunsi ati ni apoti atilẹba.A nṣe awọn pada laarin ọjọ 3-5 lẹhin gbigba.Awọn nkan aṣa ko le pada.Kan si wa: service@roymall.com tabi Whatsapp: +86193598494712.Ilana Isanwo
Iwọ yoo gba isanwo lẹhin gbigba nkan. A ko san owo gbigbe pada.Kan si wa: service@roymall.com tabi Whatsapp: +8619359849471Specifications:
- Frequency range: 1.6-50mhz
- Power measurement range: 0.5w-150w
- Standing wave measurement range: 1.0-99.9
- Insertion loss: uff1c 0.12db
- Inserted standing wave: u2264 1.02
- Measurement accuracy: better than u00b1 5%
- Standing wave alarm: u2265 2.0 (with closing function)
- RF interface type: sl16-m or n (default m)
- Display content: forward power; Standing wave; Antenna end power; Efficiency
- Power supply: built-in 3.7v/1000mah rechargeable lithium battery or USB type-C
- Shutdown power consumption: uff1c 0.1ua
- Data communication: USB type-C
- Firmware upgrade: supported
- Overall size: 88 x 38 x 64mm/3.5 x 1.5 x 2.5" (excluding protruding parts)
Features:
1. According to the fitting algorithm of detector diode characteristics and double reference subsection detection, the accuracy in the whole power range of 0.5w-150w is better than 5%.
2. There are five interface display modes, which can be selected by one click according to your preferences.
3. High speed average detection mode, real-time efficiency display.
4. Buzzer alarm when standing wave is greater than 2.0.
5. Compatible with open source software code, free code modification brings more fun.
6. USB firmware upgrade does not require a dedicated burner.
7. Built-in lithium battery can be used for more than 50 hours after charging.
8. Multi function keys make it more fun to use and provide an interactive way for adding functions in the future.
Attention:
Continuous transmission in FM or am mode is recommended not to be greater than 110W; SSB or CW can work under the power of 200W for a long time; More than 500W will damage the detection component.
Brief Introduction:
- Long press switch button to turn on/off. Short press to switch display interface, and double-click to switch the standing wave alarm
- There are five kinds of display interfaces, which are automatically saved and automatically called after the next boot
- The charging red light is displayed, and the light is turned off when it is fully charged.
Package Included:
1 x SWR Power Meter
